Mirror series

1 coarse grinding is thinned by iron plate, if the flatness of poor product, need to reach a certain size of grinding out a plane, which is virtually increased the difficulty. So the synthesis of iron plate of choice to consider a few points, is the iron plate to cause high hardness and better cutting force. The key here is to select the disc, different materials, hardness, selection of plates is not the same, commonly used cast iron disk, diamond grinding disk.

2 coarse throwing this process mainly through the white cloth for rough throwing and guiding angle process. In this process, there are three points to note: the first is the weight, weight is too light, the iron plate will not be able to throw the mark, the specific pressure depends on the hardness of the workpiece. Second is this product to lead angle, you need a piece of cloth in the bottom pad, soft leather, this helps the lead angle, but not too soft leather. The cutting force is not too soft. Third is the choice of liquids, liquid quality many manufacturers provide are too general, can not achieve the effect that 10 minutes behind. This procedure is the priority among priorities, the polishing process, then from this successful product has also been speeded up.

3 fine cast into the although the requirement is not too difficult, but can not be ignored. First of all, this process is easy to scratch the skin so small products, polishing, and polishing quality must be guaranteed, second is the health conditions, employees must do maintenance work.

The application of mirror finish

Stainless steel mirror panels are widely used, architectural decoration, interior decoration, office decoration, elevator decoration, industrial decoration, equipment decoration and other decoration, decoration and decoration fields have been widely applied.

The main stainless steel mirror panel products are: 201 stainless steel mirror panel, 304 stainless steel mirror panel, 316 stainless steel mirror panel and a series of color stainless steel mirror panels.

Specifications